How To Clear The Iron Front Door
It is often necessary to dismantle the doors when repairs are carried out. This work requires an implementing agent of certain knowledge and, in addition, there is a sufficient amount of debris in its implementation. The YouDo website master does not simply dismantle and construct doors, they can also remove the construction debris generated during the operation.
Installation of intercompany doors with step description
If, after dismantling, the door is scheduled to be used in the future, for example, to be set on the way, care should be taken to ensure that the door box is full and that the cash is clear.
Most often, however, the dismantling of inter-community doors is necessary to release a new door. The sequence of work is as follows:
- The removal of the old door from the hinge;
- Dismantling cash;
- The removal of the self-reliefs that hold the door in the project;
- Sprayed with a mounting foam knife;
- Extraction of the door box.
If the purpose is to remove the doors without harming them, the caesus and flat lips can be used. The plate should be carefully placed in the gap between the casher and the door box, and the precise movement of the flat lips should be removed. Once all the nails are recovered, the cash can be carefully removed. Of course, such a dismantlement of the door requires skills and experience, so only specialists trust it.
Maintenance of metal doors
Many housing owners in the purchase of the front door favour a metal option. Over time, there may be a desire to replace the old door with a better quality or better fitting in the interrier. In such a case, it is necessary to dismantle the metal doors.
A special instrument for cutting metal, such as a Bulgarian, is required to dismantle the iron door.
Steel door removal rates are usually higher than wood removal. This is due to the greater labour-intensiveness of iron door removal.
The workshop and installation of a new steel door include the following technological steps:
- The removal of the old floor, cash and door box;
- A submerged door to the appropriate dimensions. The fastest and most accurate expansion can be achieved through a diamond-disk construction tool;
- Disposal of building debris and surface cleaning;
- Installation of the door box and fixation of the door pins;
- Installation of the door half;
- design sealing front door with mounting foam.
