How To Make The Front Door With Your Hands
The entrance door must be not only strong but beautiful. Increasingly, the access door uses the metal that provides the highest level of protection. Most often, the installation of an inlet metal door can be performed on its own and special skills and will not be necessary. It's gonna need to prepare a doorway at the right size.
A minimum set is a mandatory instrument for the installation of the front door: perforator, level, hammer, mounting foam, fastening elements, enker. If this tool is available, work can be undertaken.
1 New installation with your hands. It usually starts with the old one. Take it off and prepare a place for the new installation. To correctly establish it, you might need to expand or narrow the doorway. With expansion, if the door box is concrete, use the Bulgarian, it will provide a smooth flat surface. The dimension of the projection shall be 20 to 25 mm higher than the size of the door box.
2 When a metal door is installed for the exact subtle of boxes, use wooden clips. By level, make sure that the door is firmly vertical. Fill the box with the anker chatter, put it in the pre-screen holes in the walls. Make sure the box is correctly installed, make it permanently fixed by cement solution.
3 In the event that the doorway has to be squeezed, put an extra space in a brick or baton, setting up a vertical wooden deck almost to the top. Bethon's pouring through the hole in the top of the deck. After the deck is cold, the deck remains in the top of the unfinished section is stored with a brick and it turns.
4 Before the bay of the concrete, it is necessary to strengthen the position of the coupling with the capital wall with the openings of the fixtures in the cement solution. If you're doing a brick lining, put the fixtures every three to four times.
5 Installation of the door box, drill holes for the closure. Put the foam on the door lock. Take the final separation of the door box interface with the walls. If the door doesn't have a decorative exterior separation or you don't like it, use materials such as laminate, viniliscope or natural tree to give the door the necessary decorative qualities.
