What's The Lubrication Of The Rail Access Door
Option 1. The door started screaming almost immediately after installation
Probably the reason for the wrong installation of the front door. The problem needs to be addressed as soon as possible, otherwise it is completely deformed and such a defect will no longer be rectified in the future.
Decision: To refer to a brigade that was mounting to correct the error.
Option 2. The door screams and it's hard to open.
Maybe there's trash in the hole. This problem is most commonly encountered after repairs or doors on the Sunset House border.
Decision:
- Push the hinge mechanism (possible to use a homemade phenomenon).
- I'll put a lubricant on the hinge.
- In complex cases, the door will have to be removed from the hinge and carefully cleaned of the contamination. Then smash the loops and hang again.
Option 3. Squeaking hinges in the door
This is the most common reason for the door crisis. We need to smash the loops at least once a year. And if the doors are screaming in the apartment, maybe they're so implying that it's time to lubrate them.
- Carefully lift the doors at 1, 5-2 cm.
- Put solid material under it to record in that position.
- Smash the loops.
- Get the door back to the front.
- Open and close within 1-2 minutes so that the lubricant is uniformly distributed through the hinge mechanism.
- If you have an inlet metal door with hidden hinges, you'll have to call special equipment masters to adjust them.
What do you want to scream the door?
- Machinery oil (with syringe);
- Solidol (small stick);
- Griffel powder (or grifle of simple pencil).
Option 4. Smartly chattering about the box, sweating.
If the door screams because it's crawling with the box, there'll be traces on the door and box. In addition, whistle-blowing sometimes screams the door lock (if the locks don't enter the pads on the box) and screams the door seals.
